REGULATOR RELAY VALVE RR100-F30-Y
PART NR. RR100-F30 | Ingersoll-rand- Ordered before 12.00, shipped same day
- 100 years of engine spare part knowledge
- 12 months warranty
Description
The RR100-F30-Y includes air valve and regulator functions. The RR100-F30-Y is made of three main components:
- The master regulator which sets the pilot pressure.
- The solenoid valve which will open or close the system when the operator actuates the switch key. The slave regulator which is the main body.
- The slave regulator will receive the signal from the master regulator through the solenoid valve.
For pre-engage starters the signal pressure will come from the master regulator through the solenoid valve to the pilot “In” port of the air starter drive housing, giving the signal to engage the drive pinion into the ring gear. After engaging the drive pinion, air will come out through the “Out” port of the drive housing and will go to the cap of the slave regulator.
The slave regulator using the pressure signal on top of the upper
piston will force the valve piston off its seat. That allows air to flow
into the control chamber below the upper piston, through the
outlet port of the RR100 valve to the starter motor. Outlet pressure
increases in the downstream system and sensing chamber (under
the upper piston) and applies an upward force on the bottom of
the upper piston. The upper piston and valve piston move upward.
Upward movement stops when the forces below the upper piston
balance the force above the upper piston
Product specifications
Engine brand | Daihatsu |
---|---|
Engine type | Daihatsu DC-17(a) |
Product type | Valve |
Height | 160 millimeter |
Length | 120 millimeter |
Weight | 2.6 kilogram |
Width | 110 millimeter |
Height (packing) | 210 millimeter |
Length (packing) | 160 millimeter |
Width (packing) | 160 millimeter |